Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 5.0_RC3 (T105) #0: Sat Apr 11 20:54:11 JST 2009 root@t105.naobsd.org:/usr/obj/amd64/sys/arch/amd64/compile/T105 total memory = 2046 MB avail memory = 1970 MB timecounter: Timecounters tick every 1.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 SMBIOS rev. 2.5 @ 0xf0b70 (48 entries) Dell Inc. PowerEdge T105 ((none)) mainbus0 (root) cpu0 at mainbus0 apid 0: AMD 686-class, 2109MHz, id 0x100f23 P-state 0: 2100MHz (1300MHz) P-state 1: 1800MHz (1000MHz) P-state 2: 1600MHz (800MHz) P-state 3: 1300MHz (900MHz) P-state 4: 1050MHz (650MHz) cpu1 at mainbus0 apid 1: AMD 686-class, 2109MHz, id 0x100f23 cpu2 at mainbus0 apid 2: AMD 686-class, 2109MHz, id 0x100f23 cpu3 at mainbus0 apid 3: AMD 686-class, 2109MHz, id 0x100f23 ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 11, 24 pins acpi0 at mainbus0: Intel ACPICA 20080321 acpi0: X/RSDT: OemId , AslId acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 ACPI-Fast 24-bit timer acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button hpet0 at acpi0 (MMTM, PNP0103-0) hpet0: mem 0xfed00000-0xfed003ff irq 0,8 timecounter: Timecounter "hpet0" frequency 25000000 Hz quality 2000 attimer0 at acpi0 (PIT0, PNP0100): AT Timer attimer0: io 0x40-0x43 irq 0 pcppi0 at acpi0 (SPK0, PNP0800) pcppi0: io 0x61 midi0 at pcppi0: PC speaker (CPU-intensive output) spkr0 at pcppi0 sysbeep0 at pcppi0 com0 at acpi0 (COM1, PNP0501-1) com0: io 0x3f8-0x3ff irq 4 com0: ns16550a, working fifo attimer0: attached to pcppi0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok vendor 0x10de product 0x005e (miscellaneous memory, revision 0xa4) at pci0 dev 0 function 0 not configured pcib0 at pci0 dev 1 function 0 pcib0: vendor 0x10de product 0x0051 (rev. 0xf1) nfsmbc0 at pci0 dev 1 function 1: vendor 0x10de product 0x0052 (rev. 0xa2) nfsmb0 at nfsmbc0 SMBus 1 iic0 at nfsmb0: I2C bus spdmem0 at iic0 addr 0x52 spdmem0: DDR2 SDRAM memory, data ECC, 1024MB, 667MHz (PC2-5300) spdmem0: 14 rows, 10 cols, 2 ranks, 4 banks/chip, 3.00ns cycle time spdmem0: tAA-tRCD-tRP-tRAS: 5-5-5-15 spdmem0: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing) spdmem1 at iic0 addr 0x53 spdmem1: DDR2 SDRAM memory, data ECC, 1024MB, 667MHz (PC2-5300) spdmem1: 14 rows, 10 cols, 2 ranks, 4 banks/chip, 3.00ns cycle time spdmem1: tAA-tRCD-tRP-tRAS: 5-5-5-15 spdmem1: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing) nfsmb1 at nfsmbc0 SMBus 2 iic1 at nfsmb1: I2C bus ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x005a (rev. 0xa2) LUS0: Picked IRQ 20 with weight 0 ohci0: interrupting at ioapic0 pin 20 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 ehci0 at pci0 dev 2 function 1: vendor 0x10de product 0x005b (rev. 0xa4) LUS2: Picked IRQ 21 with weight 0 ehci0: interrupting at ioapic0 pin 21 ehci0: EHCI version 1.0 ehci0: companion controller, 4 ports each: ohci0 usb1 at ehci0: USB revision 2.0 viaide0 at pci0 dev 7 function 0 viaide0: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3) viaide0: bus-master DMA support present viaide0: primary channel wired to native-PCI mode LTID: Picked IRQ 22 with weight 0 viaide0: using ioapic0 pin 22 for native-PCI interrupt atabus0 at viaide0 channel 0 viaide0: secondary channel wired to native-PCI mode atabus1 at viaide0 channel 1 viaide1 at pci0 dev 8 function 0 viaide1: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3) viaide1: bus-master DMA support present viaide1: primary channel wired to native-PCI mode LSI1: Picked IRQ 23 with weight 0 viaide1: using ioapic0 pin 23 for native-PCI interrupt atabus2 at viaide1 channel 0 viaide1: secondary channel wired to native-PCI mode atabus3 at viaide1 channel 1 ppb0 at pci0 dev 9 function 0: vendor 0x10de product 0x005c (rev. 0xf2) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga0 at pci1 dev 8 function 0: vendor 0x1002 product 0x515e (rev. 0x02) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 radeondrm0 at vga0: ATI ES1000 RN50 (unit 0) radeondrm0: Initialized radeon 1.26.0 20060524 ppb1 at pci0 dev 11 function 0: vendor 0x10de product 0x005d (rev. 0xf3) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok bge0 at pci2 dev 0 function 0: Broadcom BCM5722 Gigabit Ethernet bge0: interrupting at ioapic0 pin 18 bge0: ASIC BCM5755 C0 (0xa200), Ethernet address **:**:**:**:**:** bge0: setting short Tx thresholds ukphy0 at bge0 phy 1: Generic IEEE 802.3u media interface ukphy0: OUI 0x000af7, model 0x002d, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb2 at pci0 dev 12 function 0: vendor 0x10de product 0x005d (rev. 0xf3) pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok ppb3 at pci0 dev 13 function 0: vendor 0x10de product 0x005d (rev. 0xf3) pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled, rd/line, wr/inv ok ppb4 at pci0 dev 14 function 0: vendor 0x10de product 0x005d (rev. 0xa3) pci5 at ppb4 bus 5 pci5: i/o space, memory space enabled, rd/line, wr/inv ok pchb0 at pci0 dev 24 function 0 pchb0: vendor 0x1022 product 0x1200 (rev. 0x00) pchb1 at pci0 dev 24 function 1 pchb1: vendor 0x1022 product 0x1201 (rev. 0x00) pchb2 at pci0 dev 24 function 2 pchb2: vendor 0x1022 product 0x1202 (rev. 0x00) amdtemp0 at pci0 dev 24 function 3 amdtemp0: AMD CPU Temperature Sensors (Family10h / Family11h) pchb3 at pci0 dev 24 function 4 pchb3: vendor 0x1022 product 0x1204 (rev. 0x00) isa0 at pcib0 timecounter: Timecounter "clockinterrupt" frequency 4000 Hz quality 0 timecounter: Timecounter "TSC" frequency 2109838730 Hz quality 3000 uhub0 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 10 ports with 10 removable, self powered uhub1 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 10 ports with 10 removable, self powered viaide0 port 0: device present, speed: 3.0Gb/s viaide1 port 0: device present, speed: 1.5Gb/s IPsec: Initialized Security Association Processing. wd0 at atabus0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) atapibus0 at atabus2: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) cd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) Kernelized RAIDframe activated pad0: outputs: 44100Hz, 16-bit, stereo audio0 at pad0: half duplex